Instructions on how to use hooks Instructions on how to use picture strips

Ensure surface is clean & sound Remove backing paper from one side of strip Stick strip firmly to back of hook Remove backing paper from other side Position on wall and push firmly Leave for one hour and then ready to use Stick strip firmly to back of hook Clean removal - no residue or damage

1. Ensure surface is clean & sound

2. Remove backing paper from one side of strip

3. Stick strip firmly to back of hook

4. Remove backing paper from other side

5. Position on wall and push firmly

6. Leave for one hour and then ready to use

7. To remove: Hold hook very firmly and pull tab down keeping your hand as close to the wall as possible Continue pulling till strip releases

8. Clean removal - no residue or damage

Ensure surface is clean & sound Use the velcro picture strips Remove backing paper from one of the velcro pads Place pad firmly to one of the top corners of picture frame Place opposite velcro pad firmly over the first Repeat and position pads as shown Remove backing paper from each set of pads Position on wall and push firmly over each pad To remove picture: To remove pads:

1. Ensure surface is clean & sound

2. Use the velcro picture strips

3. Remove backing paper from one of the velcro pads

4. Place pad firmly to one of the top corners of picture frame

5. Place opposite velcro pad firmly over the first

6. Repeat and position pads as shown

7. Remove backing paper from each set of pads

8. Position on wall and push firmly over each pad holding in place for two minutes

9. To remove picture: Hold picture at bottom and remove slowly at an angle so the velcro pads separate

10. To remove pads: Hold pad very firmly and pull tab down keeping your hand as close to the wall as possible Continue pulling till strip releases Never pull tab towards you